Who it’s for
- Small and mid-sized engineering firms holding a PEO certificate of authorization
- Structural, civil, mechanical, electrical and building science engineers
- Geotechnical and environmental engineering firms
- Sole practitioners and engineers starting their own firm
- Firms whose contracts require a set E&O limit or a project-specific policy
- Engineers whose current broker hasn't been able to find the coverage they need
What PEO requires
Under section 74 of Ontario Regulation 941, a holder of a certificate of authorization must carry professional liability insurance that meets these minimums:
- Limits: at least $250,000 for each claim, and either $500,000 a year in total or a limit that reinstates automatically.
- Deductible: no more than $5,000 or 5% of the fees billed in the previous twelve months, whichever is greater.
- Coverage: errors, omissions and negligent acts in all the professional engineering services you offer or provide to the public.
- Notice: the policy can’t be cancelled or changed in a way that breaks these rules without 45 days’ written notice (15 days for non-payment).
- Insurer: one with at least $20 million in capital and surplus, or Lloyd’s.
A firm that doesn’t carry this insurance can still practise, but before signing an agreement it must give each client PEO’s written notice that it isn’t insured to these minimums and get the client’s written authority to go ahead. There are also narrow exemptions: work covered by the Ontario Association of Architects’ indemnity plan, work where other insurance covers substantially all claims, and pollution, nuclear, aviation and shipping hazards.
In practice, the disclosure route closes doors. Many clients, and most public-sector contracts, want proof of E&O before they’ll sign.
What engineering E&O covers
Engineering E&O responds when a client or someone else says your professional work caused them a loss: a design error, a missed calculation, a report that turned out to be wrong, an inspection that didn’t catch something, or a drawing review that missed a problem. It pays to defend the claim, whether or not it has merit, and the damages if you’re found responsible, subject to the policy’s terms.
General liability is a different policy. It covers bodily injury and physical damage from your operations, like a visitor hurt at your office or damage your staff cause on a site. Most engineering firms need both.
Why the minimum is rarely enough
The PEO minimum is a regulatory floor. It isn’t sized to your work. A few things push the limit up:
- Contracts. Many clients set the limit they want to see, often well above the PEO minimum, and some ask to be named on the policy or for coverage to continue for years after the job.
- Defence costs. On many E&O policies, defence costs reduce the limit. A long dispute can use up a small limit before any settlement is paid.
- Project size. One claim on a larger building or infrastructure project can be far bigger than a $250,000 limit.
- Discipline. Insurers look closely at what you do. Structural and geotechnical work are generally treated as higher risk than, say, mechanical design for small commercial buildings.
Claims-made: the traps
Almost all engineering E&O is written on a claims-made basis. The policy in force when the claim is made responds, but only for work done after the policy’s retroactive date. Three things go wrong:
- Changing insurers carelessly. If the new policy starts a new retroactive date, every past project is left uninsured. Keep the original date.
- A gap in coverage. Even a short lapse can break continuity and reset the retroactive date.
- Closing the firm or retiring. Claims can arrive years after the work. An extended reporting period has to be arranged before the policy ends.
Contracts, subconsultants and project policies
Engineering contracts often shift more risk onto the engineer than the law would on its own: broad indemnities, guarantees about results, or liability with no cap. E&O policies usually exclude liability you’ve taken on by contract that you wouldn’t otherwise have, so a clause you agreed to may not be insured. It’s worth having the insurance clauses reviewed before you sign.
If you hire subconsultants, ask for proof of their own E&O and check their limits meet the contract. On large projects, an owner may require a project-specific policy covering the whole design team for the length of the project and a period after.
Where your business and family policies overlap
Engineers who own their firm have a few gaps to check:
- Your personal umbrella won’t cover professional liability. The firm’s E&O limit is the protection.
- Work outside the firm, such as a favour for a friend or a side project under your own seal, usually isn’t covered by the firm’s policy.
- A home office with drawings, plotters and computers needs the business property covered, because the home policy covers very little of it.
- The building owned by a holding company needs the right owner named on the property policy. See property owned by a holding company.
- Client data and drawings on laptops and in the cloud are a cyber exposure that E&O doesn’t cover.
How Steve works on this
Engineering E&O is a specialty market, and not every broker has access to the insurers that write it well. Steve has helped engineering firms find coverage when their previous broker couldn’t. He starts with what the firm actually does: disciplines, project types and sizes, the contracts you sign, and your claims history. He goes through the coverage summary with you, explains the exclusions and the retroactive date in plain terms, gives you options from more than 20 insurers and tells you what he’d do. He can review the insurance clauses in a contract before you sign, and he reaches out before each renewal to ask about new services, bigger projects and changes in the team.
For HR, environmental, management and other consultants, see E&O insurance for consultants.
Common questions
Does PEO require engineers to carry professional liability insurance?
Holders of a certificate of authorization must, under section 74 of Ontario Regulation 941. The minimum is $250,000 for each claim and $500,000 a year in total (or a policy limit that reinstates automatically), with a maximum deductible of $5,000 or 5% of the previous year's billings, whichever is greater. A firm that doesn't carry it must give each client PEO's written notice before signing an agreement and get the client's written authority to go ahead without it. There are also narrow exemptions, such as work covered by the Ontario Association of Architects' indemnity plan.
Is the PEO minimum enough?
Usually not. It's a floor set by the regulator, not a measure of your exposure. Many public-sector and commercial clients ask for higher limits in their contracts, and a single claim on a larger project, including defence costs, can use up a low limit quickly. The right limit depends on the work you do, the size of your projects and what your contracts require.
What is a retroactive date, and why does it matter if I change insurers?
Engineering E&O is almost always claims-made: the policy in force when the claim is made responds, but only for work done after the retroactive date. When you change insurers, the new policy should keep your original retroactive date. If it starts a new one, past projects can be left uninsured.
Do I need coverage after I retire or close the firm?
Claims about a design can arrive years after the work is done. When a firm closes or an engineer retires, an extended reporting period (run-off or tail coverage) gives time to report those claims. It has to be arranged before the policy ends, so plan for it ahead of time.
Does my personal umbrella cover professional liability?
No. Personal umbrella policies normally exclude claims arising from your professional services. That's what the firm's E&O policy is for, which is why its limit matters.
If the firm has a policy, do individual engineers need their own?
A firm's policy usually covers its engineers for work done on the firm's behalf. Work done on the side, for a different company or under your own seal outside the firm, usually isn't covered. If you do any work outside the firm, check the wording.
What is a project-specific policy?
A policy that covers one project, usually a large one, for its full length plus a period after completion, often covering the whole design team. Some owners require one. It sits alongside your firm's annual policy rather than replacing it.